Focusrite OctoPre MKII DYNAMIC Pro 8 Micrófono Preamp Estudio Channels with compression
Información en inglés: With eight channels of Focusrite microphone preamplification, eight VCA-based Red 3-derived compressors and built-in 24-bit / 96kHz digital inputs and outputs, OctoPre MkII Dynamic is Focusrite’s feature-rich expansion upgrade for any digital audio workstation It’s equally an ideal expansion for any analogue or digital console, or hard disk recorder
Digital inputs and outputs let you make the most of often-neglected ADAT I/O; ideal for expanding the number of mic pre inputs on your interface or for providing analogue monitoring from any digital ADAT feed OctoPre MKII DYNAMIC Más información en inglés(EU.MusicianUniversity.com)
• THD+N (maximum at any compression threshold, input < +16dBu, gain at minimum): < 0.18%
• A/D Dynamic Range 110dB ‘A-weighted’ (all inputs)
• D/A Dynamic Range 110dB ‘A-weighted’ (all outputs)
• Clock Jitter < 250 pico seconds
• Sample rates: 44.1kHz to 96kHz
• Sample Rate Clock Accuracy: +/- 20PPM
• JetPLL technology providing superb jitter reduction for class leading converter performance
• Clock sources: Internal, Word Clock and ADAT (from ADAT1 input only)
Single unit unboxed net weight : 3.6 kg / 7.3 lbs
Single unit boxed net weight : 4.05 kg / 8.9 lbs
Unboxed: W = 484mm / 19”, H = 45mm / 1.8”, D = 265mm / 10.4”
Boxed: W= 595 mm / 23.5”, H= 120 mm / 4.75”, D= 340 mm / 13.4”
FRONT AND REAR CONNECTIVITY
Analogue Channel Inputs:
2x Mic / Line / Instrument inputs on the rear panel (Inputs 1 and 2). Switches automatically between Mic (XLR) and Line (TRS). Instrument selected via front panel buttons.
6x Mic / Line inputs on the rear panel. Switches automatically between Mic (XLR) and Line (TRS).
Analogue Channel Outputs:
8x Balanced 1/4" TRS Jack on the rear panel
Switching to enable monitoring of A/D inputs or ADAT inputs with ADDA switch on front panel.
2x ADAT Lightpipe (TOSLINK) inputs. Provides 8 channels at 44.1 and 48kHz (please note that in this mode, only ADAT input 1 is active, allowing for a total of 8 ADAT input channels at 44.1 / 48kHz). Provide 4 channels per port (8 total) at 88.2 and 96kHz (S-MUX).
2x ADAT Lightpipe (TOSLINK) outputs. Provides 8 channels per port (16 total) at 44.1 and 48kHz (please note that in this mode, the digital outputs are mirrored, providing outputs 1 - 8 on both ports). Provide 4 channels per port (8 total) at 88.2 and 96kHz (S-MUX).
Word-Clock in and out on rear panel BNC connectors
Front Panel Indicators:
8x Five segment input LED meters (-42, -18, -6, -3 and 0dBFS)
4x Sample Rate LED's (44.1k, 48k, 88.2k and 96k)
3x Sync Source LED's (Internal, Word Clock and ADAT)
'Lock' indicator LED
ADDA Switch for analogue output source selection (A/D’s or ADAT inputs)